All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.
All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.
COLORS
FIELDS OF APPLICATION
- Anti-corrosion primer for the protection of steel armatures.
- Applicable in marine environments or in chloride contaminated concrete.
- It also acts as a bonding bridge between the new concrete and the armatures, as it reacts with the cement.
- It can be used on floors, facings, both INDOORS and OUTDOORS and in swimming pools.
HOW IS IT APPLIED?
Before applying ANTI-OXID LIQUID we recommend as follows:
- Remove any remaining deteriorated, unconnected concrete.
- Remove all traces of dust, paints, waxes and release agents.
- Remove coarse rust residues. Brush and vacuum dust.
How to apply ANTI-OXID LIQUID
- Apply a uniform layer of ANTI-OXID LIQUID using a brush, roller or spray system.
- Allow to dry for 4 hours and apply a second uniform layer using the same method.
- When the ANTI-OXID LIQUID has dried completely, after approximately 2 hours, you can redo your concrete structure with FIX-REPAR R2 or FIX-REPAR R4 depending on the compressive strength requirements.
HOW IS IT RECYCLED?
- Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
- Use plastic recycling bins for unusable and empty plastic packaging.
- Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.
