Before applying EPOXICOLOR POOL we recommend as follows:

• The secret of a successful acid-resistant coating lies in the correct and strict preparation of the surface. To this end, the following points must be complied with:
  1. For new concrete, you must wait for the concrete to set completely (minimum 30 days). Moisture must be <4% by weight. On old concrete, we shall also check that the moisture content is <4% by weight. (use a hygrometer).
  2. For S9 Rosa Gres blocks, it is not necessary to wait for the blocks to dry: glue the blocks together with TECNOCOL GEL cement glue and after 24 hours we can waterproof and protect them chemically.
  3. Gutters and regulating basins must be pre-waterproofed with two layers of HIDROFIX or IMPERTOT following their respective application instructions.
  4. The minimum application temperature is +10ºC, understanding that the temperature of the surface will be at least +3ºC above the dew point.

Preparing the components:

• The ideal application temperature is +20ºC. When the temperature is very low and the liquid is cold and viscous, immerse the bottle in hot (not boiling) water until it becomes fluid.

Preparing the mix:

• A set consists of: 1 small bottle of liquid +1 bucket with a white paste
• Pour the contents of the bottle completely into the bucket.
• Mix with a spiral mixer coupled to an electric drill at a high RPM.
• Do not add anything else: The colour and special anti-sagging thickener has already been incorporated into EPOXICOLOR POOL.
• Download the EPOXICOLOR POOL Technical Data Sheet for Step by Step installation and all the technical details to ensure correct, safe application.