FIX-REVOCO PROYECTABLE

SPRAYABLE pre-mixed mortar for plastering walls. It is a CONSTANT QUALITY mortar, ideal when the application requires safety and durability. Especially suited to Swimming Pools

  • An ingenious blend of sands, hydraulic cement and specific additives to obtain a ready-mixed sprayable mortar capable of setting normally but drying quickly: it is firm to the touch in 12 hours.
  • Contains no clays, no ashes, no expansive sands
  • Its actual residual moisture content will be less than 3% within only 3 days.
  • It is a quality plaster with a constant formulatio

Eco Design
Eco Fixcer

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
View Vídeo
Technical Data Sheet
Safety Data Sheet
Declaration of Performance
Chemical Resistance

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
Eco Fixcer

COLORS

FIELDS OF APPLICATION

  • It is ideal for high yields.
  • It may be applied without prior priming and bridging.
  • Especially suited to swimming pools.
  • It can be used for plastering layers up to 25 mm thick in swimming pools, exteriors and industries

     

  • It is designed for those important applications where the durability of the tile installation begins in the mortar screeds.
  • With FIX-REVOCO PROYECTABLE, you can produce plaster of up to 25 mm thickness.
  • Producing shrinkage-free plasters with normal working time and fast drying
  • Urgent repairs in high-traffic areas: restaurants, shops, corridors and similar spaces.
  • Suitable for indoor and outdoor use.
  • FIX-REVOCO PROYECTABLE has a specific granulometry for plastering walls, although it can also be used on mechanically undemanding floors.

HOW IS IT APPLIED?

Before applying FIX-REVOCO PROYECTABLE we recommend as follows:

In all cases the following distinctions must be made:

  • FIX-REVOCO PROYECTABLE allows mortar plastering on substrates such as brick, concrete, mortar and concrete block walls. The substrates must in all cases be in good condition, without spalling, cracks, dust or release oils.
  • You must ALWAYS check the absorption of the substrate as follows: wet the substrate with a brush to check if it gets wet when you pass our hand over it. If this is the case, the substrate is not absorbent, it should not be wettedbeforehand. If this is not the case, the substrate must be dampened before applying the FIX-REVOCO PROYECTABLE.

Preparing the mix:

  • Mixing can be done with an automatic pump, in a mixer or in a lorry mixer.
  • Add enough water to give the resulting mortar a “wet sand” consistency. At this point, do not add any more water.
  • The recommended water content is 17% of the weight of the FIX-REVOCO PROYECTABLE, i.e. 4.25 litres of water for each 25 kg bag. Mix for 4 to 5 minutes.
  • Download the FIX-REVOCO PROYECTABLE Data Sheet to check all the technical details and ensure correct, safe application.

HOW IS IT RECYCLED?

  • Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
  • Use plastic recycling bins for unusable and empty plastic packaging. 
  • Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.

RELATED PRODUCTS

Item added to cart View Cart Checkout