Before applying HIDROELASTIC we recommend as follows:

• All contact substrates must be fully cured, resistant and solid, as well as free of dust, paint, waxes, oils and grease at all times. Preparation and application
• We recommend that all corners, apexes and drains be fitted with the BANDA IMPERMEABLE 120/70 or the FIX-BANDA in order to achieve total waterproofing of these critical points.
• The FIX-BANDA is an ultra-elastic butyl product that is very easy to apply: just remove the protective papers.
• In areas with strong sunshine, wet the surface with water until it is saturated, removing excess water and avoiding waterlogging.

Preparing the mix:

• HIDROELASTIC is a pre-dosed product. Pour the liquid from the small bucket into the large bucket, then add the powder and mix with an electric mixer. The resulting mixture will be homogeneous. For airless application add 750 ml. of extra water per 20 kg bucket.

Application:

• Apply a 1st layer of HIDROELASTIC with a brush or fine trowel or pneumatic spray system. This layer must not be more than 2 mm thick.
• Let the 1st layer dry for approx. 4 hours at +20ºC.
• Apply a 2nd layer of HIDROELASTIC perpendicular to the 1st layer.
• In swimming pools or tanks we recommend applying a minimum of 2 layers, each 1 mm thick. The aim is to withstand permanent positive pressures of maximum 3 bar. More layers means more protection, so to resist higher pressure, increase the number of layers (always apply layers with a maximum thickness of 1 mm).
• Download the HIDROELASTIC Data Sheet to check all the technical details, to view the various possible solutions according to each need and to ensure correct, safe application.