FIXAQUA PRIMER

An epoxy primer applicable to wet, dirty or disintegrable mortar substrates as an adhesion promoter.

FIXAQUA PRIMER is an advanced water-based epoxy formulation for priming dusty, friable or even wet substrates as an adhesion promoter.

  • Large porthole cover.
  • Water-based primer
  • Very low viscosity: very easy to apply.
  • Excellent adhesion.
  • Great pot-life.
  • Pre-dosed product: avoids errors on site.

Eco Design
Eco Fixcer

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
View Vídeo
Technical Data Sheet
Safety Data Sheet
Declaration of Performance
Chemical Resistance

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
Eco Fixcer

COLORS

FIELDS OF APPLICATION

  • Primer with high capillary penetration for wet or dusty mortar substrates and for the subsequent application of FIXAQUA FILM.
  • Primer for use on wood, metal, old ceramic, stainless steel, glass and acrylic based membranes.
  • Pore-covering protection for mortar or concrete surfaces which are dusty or slightly disintegrated. It reinforces and consolidates the surface, making it directly walkable and abrasion resistant
  • It can be applied horizontally, vertically, indoors and outdoors It can be applied on terraces, on floorings, in swimming pools, airports, shopping areas and food areas.

HOW IS IT APPLIED?

Before applying FIXAQUA PRIMER we recommend as follows:

  • FIXAQUA PRIMER can be applied on dusty substrates, as it will fix and seal the surface suitably for the subsequent application of paints, but it cannot be applied on decomposed materials that are not solid with the base.
  • You must check for grease, paint, tar, oil and grease.
  • It is essential to distinguish between a wet substrate and a substrate with standing water. In the latter case it is not possible to apply the product.

Preparation of the mixture

  • FIXAQUA PRIMER is pre-dosed to avoid errors on site.
  • Mix component A with component B using a stirrer at a low RPM for at least 3 minutes until the product is perfectly homogenised.
  • NEVER add any other components: no sand, no water, no solvents.
  • Basic application
  • FIXAQUA PRIMER has a very low viscosity and can therefore be applied very easily with a short nap roller on mortar or with a paint roller on metal, wood or ceramics, both on horizontal and vertical surfaces. It must be applied evenly and continuously, sealing the entire surface.
  • The pot-life of the product is one hour at +20°C, but is considerably reduced at higher temperatures. However, because the product is so easy to use, application is very quick.
  • Download the FIXAQUA PRIMER Data Sheet to check all the technical details and ensure correct, safe application.

HOW IS IT RECYCLED?

  • Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
  • Use plastic recycling bins for unusable and empty plastic packaging. 
  • Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.

RELATED PRODUCTS

Item added to cart View Cart Checkout