All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.
All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.
COLORS
FIELDS OF APPLICATION
- It can plug water leaks from pipe breakage, tanks, swimming pools and in general any structural element made of concrete.
- It is suitable for application in tunnels, galleries, wells, canals, and in general any structure where the construction material is concrete.
- It is also widely used for ultra-fast anchoring of door counter-frames.
- Ideal for ultra-fast anchoring of railings, traffic posts, bolts, light boxes, and passage of corrugated light tubes.
- Excellent for repairing window frames, doors and bolt anchors.
- Excellent for vertical and horizontal repairs, including counter-gravity.
HOW IS IT APPLIED?
Surface preparation:
- In a waterway: remove any deteriorated, unconnected, unsound or friable concrete beforehand.
- When anchoring elements: remove all traces of dust, paints, waxes, release agents and open the hole to allow the TAPA-VIAS to penetrate deeply.
- Pre-moisten highly absorbent substrates or substrates exposed to the sun in hot weather to prevent rapid loss of water from the anchoring mortar.
Preparing the mix:
- Mix EXACTLY 2.0 litres of water with 10 kg of TAPA-VIAS, or mix 400 cm3 of water with 2 kg of TAPA-VIAS. Mix quickly by HAND with a spatula and leave to stand for approx. 2 minutes. IMMEDIATELY take a small amount of TAPA-VIAS in your hand and shape it into a rounded, pointed shape.
Application:
- IMMEDIATELY insert the TAPA-VIAS into the crack in the concrete where the water is leaking and press very hard for 40 seconds until the water stops leaking out.
- Next, remove the excess, then clean and sanitise the area around the hole.
- In applications with strong sunlight, once the repair has been carried out, the surface should be protected by creating an artificial shade and/or periodically wetting the surface. This will avoid the formation of surface micro-cracks due to excessive drying speed.
- Download the TAPA-VIAS technical Data Sheet to check all the technical details and ensure correct, safe application.
HOW IS IT RECYCLED?
- Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
- Use plastic recycling bins for unusable and empty plastic packaging.
- Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.
VIDEOS
