

COLORS


FIELDS OF APPLICATION
- It is always used as a substitute for WATER when mixing with glue cement.
- Mixed with cementitious glue, it produces a flexible adhesive suitable for the most demanding requirements.
- For laying ceramic tiles, mosaics of all types, marble or slate, even large-size panels, on floor tiles and facings, both INDOOR and EXTERIOR.
- Tiles over built-in heating installations, or over cooling systems.
- Ideal for exterior installations, such as façades, balconies, terraces and areas exposed to shrinkage-dilation movements of ceramic materials.
- Tiles on precast concrete walls.
- Tiles on substrates subject to vibration and/or bending.
HOW IS IT APPLIED?
HOW IS IT RECYCLED?
Before applying ADIFLEX we recommend as follows:
- All substrates must be fully cured, resistant and solid, as well as free of dust, paint, waxes, oils and grease at all times.
- Pre-moisten highly absorbent substrates or substrates exposed to the sun in hot weather to prevent rapid loss of water from the mixture.
Preparing the mix:
- Mix approximately 5-6 litres of ADIFLEX with every 25 Kg of glue cement (e.g FIXACER). Use an electric mixer at a low RPM to avoid formation of lumps. Leave to stand for 5 minutes and remix, so that the paste is ready for use.
- Download the ADIFLEX Technical Data Sheet to check all the technical details and to ensure correct, safe application.
HOW IS IT RECYCLED?
- Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
- Use plastic recycling bins for unusable and empty plastic packaging.
- Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.














