FIX-REPAR R4

Special pre-dosed thixotropic mortar for the structural repair of concrete.

  • FIX-REPAR R4 is a highly resistant, high-quality, controlled-shrinkage, fibre-reinforced, fast-setting, resin modified mortar.
  • Physical-mechanical characteristics very similar to those of concrete: elasticity, permeability.
  • High adhesion to most building materials: concrete, stone, brick.
  • Excellent mechanical resistance during bending and compression.
  • Very high wear resistance, even in aggressive environments.
  • Fully anti-sagging.
  • Being alkaline in nature, it protects armatures.
  • Low capillarity and high impermeability.
  • Water vapour permeability.
  • Very high resistance to carbonation.
  • Pre-dosed product: mix with water and apply.

Eco Design
Eco Fixcer

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
View Vídeo
Technical Data Sheet
Safety Data Sheet
Declaration of Performance
Chemical Resistance

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
Eco Fixcer

COLORS

FIELDS OF APPLICATION

  • Vertical and horizontal repairs, including counter-gravity.
  • Reconstruction of the iron cover layer on structures, balconies, cornices, lintels, pillars and beams.
  • Achieves compressive strengths up to 46 MPa.
  • Repair of surface defects such as clogs or gravel nests, even with large thicknesses.
  • Reconstruction of concrete steps, ornamental pieces and stone walls.
  • Excellent as a repairer of window frames, doors and bolt anchorages.
  • Due to its very high resistance to wear, it is ideal for floorings, ramps, canals and bridges.

HOW IS IT APPLIED?

Antes de aplicar FIX-REPAR R4 recomendamos:

  • Eliminar cualquier resto de hormigón deteriorado, inconexo.
  • Eliminar todos los restos de polvo, pinturas, ceras, desencofrantes.

Cómo proteger los hierros de la armadura

  • En el caso de tener que proteger los hierros de la armadura aplicar dos capas uniformes de ANTI-OXID LIQUID o con FIX-REPAR ANTI-OXID.
  • Cuando FIX-REPAR ANTI-OXID se ha secado, aproximadamente a las 2 horas, toma un color gris claro que nos indica que ya está preparado.
  • Los soportes disgregados, polvorientos, muy absorbentes o expuestos al sol en épocas cálidas, los imprimaremos previamente con PRIMFIX, dejándolo secar un máximo de 2 horas antes de aplicar el FIX-REPAR R4.
  • Preparación de la mezcla del FIX-REPAR R4

Mezclar aproximadamente 3,75 litros de agua con 25 Kg. de FIX-REPAR R4.

  • Utilizar mezclador eléctrico a bajo número de r.p.m. para evitar la formación de grumos.
  • Aplicar FIX-REPAR R4 con la ayuda de un paletín.
  • FIX-REPAR R4 se aplica sin necesidad de usar encofrados en grosores mínimos de 5 mm. y máximos de 35 mm. por capa
  • Descarga la Ficha técnica de FIX-REPAR R4 para consultar todos los detalles técnicos y realizar una aplicación correcta y segura.

HOW IS IT RECYCLED?

 

  • Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
  • Use plastic recycling bins for unusable and empty plastic packaging. 
  • Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.

RELATED PRODUCTS

Item added to cart View Cart Checkout