PX UNDERWATER

Specific adhesive that polymerises with or without the presence of water For bonding and grouting of individual pieces of underwater glass mosaic tile.

  • Excellent mechanical resistance
  • High wear resistance
  • High adhesion
  • High resistance to UV radiation
  • Very good chemical resistance

Eco Design
Eco Fixcer

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
View Vídeo
Technical Data Sheet
Safety Data Sheet
Declaration of Performance
Chemical Resistance

All Fixcer products are environmentally friendly. Fixcer manufactures with sustainable construction parameters and complies with the EN14.001 standard to reduce environmental impact.

Eco Fixcer
Eco Fixcer

COLORS

FIELDS OF APPLICATION

  • Allows the bonding of individual pieces, i.e. that are surrounded by other pieces that will act as anchors for the new piece bonded in with PX UNDERWATER.
  • 2-in-1 product: the excess material that protrudes from the joints may be used for grouting.
  • PX UNDERWATER is a specific adhesive that polymerises with or without the continuous presence of water.

HOW IS IT APPLIED?

Before using PX UNDERWATER we recommend as follows:

  • The substrate must be clean, resistant and solid, as well as free of dust, waxes, oils, grease, oxides and old paint. The mortar substrates where PX UNDERWATER is to be applied must be perfectly set.
  • The correct, thorough and detailed repair of the gap between parts is the only way to guarantee a long-lasting grip.
  • Underwater application is by definition very complicated as the applicator must repeatedly dive into the water to clean the gap between the parts properly.
  • The premise of this preliminary preparation is to ensure that there are NO remains of the old adhesive that previously secured the fallen piece, i.e. you must clean down to the waterproofing that was underneath the cement glue.

Preparation

  • PX UNDERWATER is a tricomponent product: mix with a mixer coupled to an electric drill for 2-3 minutes intensively.

Application of PX UNDERWATER

  • The applicator must first put on disposable nitrile gloves. Next, apply a good amount of PX UNDERWATER to the back of the part to be laid. The aim is to allow the excess product to protrude through the joints and act as a grout.
  • They must then be immersed in the swimming pool with the mosaic tile and the PX UNDERWATER adhesive on the back of the tile. Place the piece in the corresponding hole and press down very hard so that the adhesive expels all the water from the hole and the adhesive comes into contact with the mortar base of the swimming pool.
  • With the excess adhesive protruding from the joints, fill the joints between the pieces.
  • Download the PX UNDERWATER Data Sheet for full technical details as well as step-by-step application instructions that will ensure correct, safe application.

 

HOW IS IT RECYCLED?

  • Use cardboard and paper recycling bins to dispose of unusable and empty sacks.
  • Use plastic recycling bins for unusable and empty plastic packaging. 
  • Mortar residues and leftover building materials must be disposed of at the appropriate green point or recycling location for your district.

RELATED PRODUCTS

Item added to cart View Cart Checkout